The Quadra-Fire Classic Bay 1200, commonly called the CB1200, has been a staple in the Quadra-Fire pellet lineup for good reason. It combines straightforward pellet-heating technology, a large hopper and substantial heat output in a traditional design that works particularly well in larger living areas.

One of its biggest advantages is installation flexibility. The CB1200 can be installed into an appropriately sized masonry or factory-built fireplace as a conventional insert, but it can also be configured as a built-in zero-clearance installation using the required rear shroud system. That makes it an interesting option for customers who want the appearance of a built-in pellet fireplace without starting with an existing masonry chimney. Installation requirements differ between configurations and should always be confirmed for the specific project. 

Performance is another strong point. With an input range of approximately 17,000 to 48,500 BTU/hr, a 75 lb. pellet hopper and published heating capability of roughly 1,000 to 2,700 sq. ft., the Classic Bay 1200 is designed more as a meaningful home heater than a decorative occasional-use appliance. Actual heating performance will depend heavily on insulation, layout, ceiling height and New Brunswick winter conditions. 

The CB1200 is also deliberately less complicated than some newer premium pellet appliances. Its proven feed system, easy-clean firepot and thermostat compatibility make it a good choice for someone who values dependable, practical pellet heat over a long list of electronic features. If you like the traditional bay-window appearance and want substantial pellet capacity, particularly in a renovation or built-in fireplace project, the Classic Bay 1200 remains a very practical option.

• Appliance Type: Pellet fireplace insert that can also be installed as an approved built-in zero-clearance pellet fireplace when configured with the required components. 
• Fuel Type: Wood pellets.
• Available Models / Sizes: Classic Bay 1200 is offered as a single CB1200 insert platform with installation and surround options selected for the project.
• Firebox Size: Not specified by manufacturer.
• Hopper Capacity: Approximately 75 lb., allowing extended operation between pellet refills depending on heat setting and pellet characteristics. 
• BTU Output: Approximately 17,000–48,500 BTU/hr input. 
• Burn Time: Not specified by manufacturer; actual run time varies with heat setting, pellet quality and hopper fill.
• Heating Capacity: Approximately 1,000–2,700 sq. ft. under suitable conditions; home construction, insulation, layout and climate will affect actual performance. 
• Efficiency: Published efficiency of approximately 68% LHV and 64% HHV. 
• Particulate Emissions: Approximately 0.8 g/hr and EPA certified. 
• Venting: Uses approved 3″ or 4″ Type L or PL pellet venting, with installation determined by the fireplace or built-in configuration. 
• Blower: Integrated convection blower distributes heated air into the room.
• Remote Control: Thermostatic control options include a programmable wall thermostat and compatible Smart Stat control. 
• Warranty: Quadra-Fire provides a limited lifetime warranty on key components including the firebox and heat exchanger, with coverage periods varying by component.